Evaluation Boards • Flash MC Experimentalboard (old) •
When you start developing flash mc applications, the evaluation board is the ideal supplement for the flash microcontroller programmer. Just insert the programmed microcontroller into the socket and turn on the power supply. The POR (Power On Reset) circuit (R1 and C5) will reset the micocontroller automatically and the quartz Q3, stabilized with C6 and C7, supplies the clock frequency.
The levels of the 15 input/output lines can be displayed with the low current LEDs. The LEDs can be disabled individually for each port by two jumpers. The solder pads 10 to 17 and 30 to 37 are provided to connect external input/output signals to the board.
Schematic and Layout
For the schematic and layout plans you need the highly recommended schematic and layout editor EAGLE. A free english version can be downloaded at http://www.cadsoft.de/freeware.htm.
Flash MC Experimentalboard (old) Schematic and layout
File size: around 14 KByte
