Eprom Programmer • Eprom Programmer 4 •
The Batronix Eprom Programmer has been developed for amateur constructors as well as small companies that need a programming device for a very affordable price. The schematics and layouts for the selfmade programmer can still be found on the Eprom Programmer 3.4 page.
Please note: The Eprom Programmer 3.x/4 has been replaced by the new Eprom Programmer BX32 which offering many advantages like the USB connection, much higher programming reliability and more.
-
Chip SupportEprom Programmer 3.4/4.0
-
NMOS Eproms2764, 27128, 27256, 27512
-
CMOS Eproms27C64, 27C128, 27C256, 27C512, 27C010, 27C020, 27C040, 27C080, 27C1001, 27C2001, 27C4001, 27C8001, 27C801, 87C257
-
EEproms28C17, 28C64, 28C256
-
Flash27SF256, 27SF512, 27SF010, 27SF020, 28F256, 28F512, 28F010, 28F020, 29C256, 29C512, 29C010, 29C020, 29C040
-
Zeropower and Timekeeper RAM48Z08, 48Z18, 48Z30, 48Z35, 48Z58, 48Z128, 48Z512, 48T08, 48T18, 48T35, 48T59
Manual: How to use and construct the devices
Manual: How to use and construct the devices
File size: around 1.8 MByte
Details
-
Hardware DetailsEprom Programmer 3.x/4.0
-
InterfaceParallel port (cable: 25 pole, SUB-D male onto SUB-D female, 1:1)
-
Power supply14-20 Volt DC, max. 100mA
-
Socket32 Pin lever socket from ECE
-
Pin driverOptimized for memory chips
-
Low voltage support5 volt chips only
-
Software DetailsEprom Programmer 3.x/4.0
-
Software
-
File formatsSupports all usual file formats like binary, intel hex and motorola hex
-
OffsetData and chip offsets
-
Hex-EditorSimple hex-editor
-
Software updatesNo updates
-
Supported operation systemsWindows 98SE, ME, 2000, XP, 2003
Windows Vista won't work! -
LanguagesEnglish, German
Batronix.com
Batronix Special: