Microcontroller Programmer • Flash MC Programmer II •
The Flash MC Programmer II is a fast parallel port programmer for several 40 pin 8051 microcontrollers.
Please note that you need a valid Prog-Studio 6 registration if you want to build and use the Flash MC Programmer!
-
Chip SupportFlash MC Programmer II
-
MicrocontrollerAT89C51
AT89LV51
AT89C52
AT89LV52
AT89C55
AT89C55WD
AT89C51RC
AT89S52
AT89S53
AT89S8252
AT89LS52
AT89LS8252
DS89C420
SST89F54
SST89F58
Manual: How to use and construct the devices
Manual: How to use and construct the devices
File size: around 1.8 MByte
Details
-
Hardware DetailsFlash MC Programmer II
-
InterfaceParallel port (cable: 25 pole, SUB-D male onto SUB-D female, 1:1)
-
Power supply14-24 Volt DC, max. 100mA
-
Socket40 Pin "Economy" Hebelfassung von ECC
-
Pin driverOptimized for microcontroller
-
Low voltage support5 volt chips only
-
Software DetailsFlash MC Programmer II
-
Software
-
File formatsSupports all usual file formats like binary, intel hex and motorola hex
-
OffsetData and chip offsets
-
Hex-EditorSimple hex-editor
-
Software updatesNo updates
-
Supported operation systemsWindows 98SE, ME, 2000, XP, 2003
Windows Vista won't work! -
LanguagesEnglish, German
Schematic
Click on the schematic to open it in full size.
Schematic and layout as Eagle files
IMPORTANT: This circuit is copyrighted by Batronix. You can build and use it for your own purposes but you are not allowed to trade with your own rebuilds!
For the schematic and layout plans you need the highly recommended schematic and layout editor EAGLE. A free english version can be downloaded at http://www.cadsoft.de/freeware.htm.
Flash MC Programmer II Schematic and Layout
File size: around 24 KByte
